north east cricket forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Durability

Go down

        Durability Empty Durability

Post  meodingu Mon Jan 10, 2011 8:14 am


Durability
The standard connectors were designed to be robust. Many previous connector designs were fragile, specifying embedded component pins or other delicate parts which proved vulnerable to bending or breakage, even with the application of modest force. The electrical contacts in a USB connector are protected by an adjacent plastic tongue, and the entire connecting assembly is usually protected by an enclosing metal sheath. Although meant to reinforce the metal connections, the construction and materials used in the plastic tongue can actually decrease the life of the connector, as some manufacturers use hard, brittle plastics that easily break when bent.[citation needed]
The connector construction always ensures that the external sheath on the plug makes contact with its counterpart in the receptacle before any of the four connectors within make electrical contact. The external metallic sheath is typically connected to system ground, thus dissipating damaging static charges. This enclosure design also provides a (moderate) degree of protection from electromagnetic interference to the USB signal while it travels through the mated connector pair (the only location when the otherwise twisted data pair travels in parallel). In addition, because of the required sizes of the power and common connections, they are made after the system ground but before the data connections. This type of staged make-break timing allows for electrically safe hot-swapping, a common practice in the design of connectors in the aerospace industry.[citation needed]
The newer Micro-USB receptacles are designed for up to 10,000 cycles of insertion and removal between the receptacle and plug, compared to 1500 for the standard USB and 5000 for the Mini-USB receptacle. This is accomplished by adding a locking device and by moving the leaf-spring connector from the jack to the plug, so that the most-stressed part is on the cable side of the connection. This change was made so that the connector on the less expensive cable would bear the most wear instead of the more expensive micro-USB device.


wedding photography
IVA 's
meodingu
meodingu
steve harmisson

Posts : 208
Join date : 2010-09-28

Back to top Go down

Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum